Cm375 installation, 1 site selection, Tools list (for tripod, mast, enclosures, and – Campbell Scientific CM375 Portable 10-Meter Mast User Manual

Page 9: Crossarms), Site selection, 1. assembled, Cm375

Text mode
Original mode

CM375 Portable 10-Meter Mast

2. Tools List (for tripod, mast, enclosures, and

crossarms)

1/2-in. and 7/16-in. open end wrenches
adjustable wrench
Phillips head screw drivers (medium, small)
Straight bit screwdrivers (large, medium)
12-in. torpedo level
side-cut pliers
pencil
tape measure
compass and site declination angle
shovel
sledge hammer (for driving ground rod and stakes)
step ladder

3. CM375 Installation

3.1 Site Selection

Select a site free from overhead power lines, and 30 m (100 ft) in any direction
from trees, buildings, and other obstructions (see FIGURE 3-1).

FIGURE 3-1. Assembled CM375