Introduction, Cautionary statements, Initial inspection – Campbell Scientific 034B-L Met One Windset User Manual
Page 9: Met one 034b wind set
Met One 034B Wind Set
1. Introduction
The 034B Wind Set combines a 3-cup anemometer and vane into a single
integrated package to measure wind speed and direction. It is cabled for use
with our dataloggers, and can provide measurements for a variety of
applications.
This manual provides information only for CRBasic dataloggers.
It is also compatible with most of our retired Edlog dataloggers.
For Edlog datalogger support, see an older manual at
or contact a Campbell
Scientific application engineer for assistance.
2. Cautionary Statements
•
manual.
•
The 034B is a precision instrument. Please handle it with care.
•
If the 034B is to be installed at heights over 6 feet, be familiar with tower
safety and follow safe tower climbing procedures.
•
Danger—Use extreme care when working near overhead electrical wires.
Check for overhead wires before mounting the 034B or before raising a
tower.
•
The set screw holes must be covered with labels to prevent corrosion and
assure the warranty.
•
The black outer jacket of the cable is Santoprene® rubber. This
compound was chosen for its resistance to temperature extremes, moisture,
and UV degradation. However, this jacket will support combustion in air.
It is rated as slow burning when tested according to U.L. 94 H.B. and will
pass FMVSS302. Local fire codes may preclude its use inside buildings.
3. Initial Inspection
Upon receipt of the 034B, inspect the packaging and contents for damage. File
damage claims with the shipping company. Immediately check package
contents against the shipping documentation (see Section 3.1, Ships With List).
Contact Campbell Scientific about any discrepancies.
The model number and cable length are printed on a label at the connection end
of the cable. Check this information against the shipping documents to ensure
the expected product and cable length are received.
NOTE
1