Campbell Scientific 034B-L Met One Windset User Manual

Page 14

Met One 034B Wind Set

5. Under the

Available Sensors and Devices list, select the Sensors |

Meteorological | Wind Speed & Direction folder. Select
034A/034B Wind Speed & Direction Sensor. Click

to move the

selection to the

Selected device window. The wind speed defaults to

meters/second. This can be changed by clicking the

Wind Speed box

and selecting one of the other options.

6. After selecting the sensor, click at the left of the screen on

Wiring

Diagram to see how the sensor is to be wired to the datalogger. The

wiring diagram can be printed out now or after more sensors are

added.

7. Select any other sensors you have, then finish the remaining Short Cut

steps to complete the program. The remaining steps are outlined in

Short Cut Help, which is accessed by clicking on

Help | Contents |

Programming Steps.