Chatsworth Products KVM Over IP - Manual (Page 44)

44
o Start in Exclusive Access Mode: Enables the exclusive access mode immediately at
Remote Console startup. This forces the Remote Consoles of all other users to close.
No one can open the Remote Console at the same time again until this user disables the
exclusive access or logs off.
• Mouse hotkey: Specifies a hotkey combination which starts either the mouse
synchronization process if pressed in the Remote Console, or is used to leave the single
mouse mode.
• Remote Console Button Keys: Button Keys allow simulating keystrokes on the remote
system that cannot be generated locally. The reason for this might be a missing key or the
fact, that the local operating system of the Remote Console is unconditionally catching this
keystroke already. Typical examples are “Control+Alt+Delete” on Windows and DOS, what
is always caught, or “Control+Backspace” on Unix or Unix-like OS for terminating the X-
Server.
The syntax to define a new Button Key is as follows:
[confirm] [+|-[*]]*
o “confirm” requests confirmation by a dialog box before the key strokes will be sent to the
remote host.
o “keycode” is the key to be sent.
o Multiple key codes can be concatenated with a plus, or a minus sign. The plus sign
builds key combinations, all keys will be pressed until a minus sign or the end of the
combination is encountered. In this case all pressed keys should be released in reversed
sequence. The minus sign builds single, separate key presses and releases.
o The star inserts a pause with duration of 100 milliseconds.
3.5.2 Keyboard/Mouse
Under KVM Settings, select Keyboard/Mouse to modify keyboard and mouse settings.
Keyboard and Mouse Settings