Chatsworth Products KVM Over IP - Manual (Page 37)

37
3.3.3.2 Setup Drive Redirection
Start Drive Redirection to display the Drive Redirection dialog.
Drive Redirection Dialog
Under Connections Parameters, designate the drive to redirect.
• Device – This is the address (either the DNS name or the IP address) of the IP console you
would like to connect to.
• Drive – The local drive you want to share with the remote computer, which could be Floppy
disc, CD-ROMs, USB-Sticks and hard drives.
Select the drive you would like to redirect. All available devices (drive letters) are shown
here. Please note that the whole drive is shared with the remote computer, not only one
partition. If you have a hard disc with more than one partition all drive letters that belong to
this disc will be redirected. The Refresh button may be used to regenerate the list of drive
letters, especially for an USB stick.
• Port – This is the network port. By default, IP console uses the remote console port (#443)
here. You may change this value if you have changed the remote console port in your IP
consoles network settings. (see section 3.6.1)