Z4-‐series seismicframe® cabinet overview, Safety information – Chatsworth Products Z4-Series SeismicFrame® Cabinet System User Manual
Page 3

3
Z4-‐Series SeismicFrame® Cabinet Overview
Introduction to the Z4-‐Series SeismicFrame® Cabinet
The Z4-‐Series SeismicFrame Cabinet System from Chatsworth Products, Inc. (CPI) has been developed
to meet a range of seismic application needs. The Z4-‐Series SeismicFrame is available in two widths,
two heights, and two depths, allowing for alignment with the size and capacity requirements for most
installations.
The Z4-‐Series SeismicFrame cabinet accessories, including cable management, power management,
thermal management and more, offer additional flexibility, enabling the cabinet to be further
configured
to
support
many
different
applications.
Safety Information
Keep a printed copy of this User’s Manual, especially the following safety information, in or near the
cabinet.
WARNINGS:
• Improper use of this product or failure to follow these instructions may result in
equipment damage, personal injury, or death. Read and understand all
instructions for proper installation and use of this product.
• Only trained service personnel or licensed electricians shall install the
equipment.
• Be sure to use sufficient personnel to safely remove the cabinet from the pallet.
• Do not attempt to move large cabinets by yourself. Obtain adequate assistance
to stabilize the cabinet during movement or hire professional equipment riggers.
• Move cabinets on installed casters with extreme care. Sudden stops, excessive
force, and uneven surfaces may cause the cabinet to overturn. Move the cabinet
with the back as the leading edge. Never push on the sides.
• The cabinet shall be level, stable, bolted and appropriately secured to the
building structure. Castors are only provided to transport the cabinet from the
receiving location to its install location.
• The cabinet shall be installed in a Restricted Access Location and only used by
trained service personnel.
• Suitable for mounting on concrete or other noncombustible surface only.