Chatsworth Products Z4-Series SeismicFrame® Cabinet System User Manual
Page 14

14
Bonding the cabinet to the telecommunications ground
Z4-‐Series SeismicFrame Cabinets should be bonded to the telecommunications ground. The top panel,
side panels, doors and mounting rails on the Z4-‐Series SeismicFrame cabinet are electrically bonded to
the frame. A ground strap bonds the side panels and doors to the frame. Nibs screws bond the top
panel to the frame. In order to bond the cabinet to the telecommunications ground, use the Ground
Terminal Block (included) to connect a bonding conductor to the telecommunications ground or signal
reference grid. Remove the mask sticker at desired grounding location and apply generous coating of
gray antioxidant. Secure grounding wire to the terminal block. Attach the block to the cabinet frame
with an 8 mm wrench using two M5 bolts and nuts.