Chatsworth Products Z4-Series SeismicFrame® Cabinet System User Manual
Page 10

10
Inspect the cabinet for damage. If any damage to the cabinet is observed, contact your distributor or
CPI Customer Service.
1. Carefully remove the cardboard wrap surrounding the cabinet.
2. Remove the four (4) cardboard corner protectors and bag.
3. Inspect inside the cabinet to insure all items are securely fastened to the cabinet. Remove any
items that were shipped inside the cabinet but are not fastened to the cabinet.
4. Remove the (2) bottom dust covers to expose the lag bolts that attach the cabinet to the pallet
using a #2 Phillips Screwdriver.
5. Remove the (4) lag bolts that hold the cabinet to the pallet using a 13 mm (1/2”) socket wrench.
6. Remove the cabinet from the pallet.
RECYCLABLE MATERIALS: CPI uses only recyclable materials in all of its cabinet
packaging. Please save packaging for later use or dispose of properly. All wood
components of CPI pallets have been properly treated to comply with the pest-‐free
certifications required by foreign countries.
7. If the cabinet is to be reshipped, save all packaging materials for reuse.
DISCLAIMER: CPI is not responsible for any damage to the cabinet or its contents after
the cabinet is repackaged and reshipped.
8. After the cabinet is unpacked, check the cabinet and the hardware kit to insure that all of the
components and hardware items have been received with the cabinet. If any components are
missing or damaged, email Technical Support at [email protected], or call toll-‐free at
800-‐834-‐4969 (US & Canada) Monday to Friday, 5 a.m. to 5 p.m., Pacific Time.