Samlex America PR-3030 - Manual (Page 3)

3 739.704 | 11.10
1 Safety instructions
1.1 Safety instructions are identified as follows
In this manual, safety instructions for personal safety are identified
with this symbol.
Instructions relating to the functional safety of the system and the
controller are in bold type.
1.2 General safety instructions
Be sure to observe the following instructions when installing the
controller and handling the batteries:
Incorrect handling of batteries results in a danger of explosion!
Escaping battery acid can result in acid burns!
Be sure to always keep children away from batteries and acid!
Smoking, open flames and open lights are not permitted when
handling batteries. Avoid the generation of sparks and wear eye
protection during installation. Be sure to always observe and follow
the handling instructions in the usage instructions and on the
battery.
Use well isolated tools only!
Do not use measurement equipment you know to be damaged or
defective!
The charge controller's constructive protective measures can dete-
riorate if it is not operated as specified by the manufacturer.
Factory labels and markings may not be altered, removed or ren-
dered unreadable. All work must be carried out in accordance with
the national and the relevant local electrical regulations!
If the device is installed abroad, information on rules and protective
measures must be obtained from the corresponding institutions/
authorities.
Do not start the installation until you are sure that you have under-
stood all technical details in these instructions and always perform
the work in the sequence described in these instructions!
The manual must also be available to third parties for all work
performed on the system.
This manual is a component of the system controller and must be
included with it when sold on.
2 Exclusion of liability
The manufacturer cannot monitor the compliance to this manual, nor the
conditions and methods of installation, operation, usage and maintenance
of the system controller. Improper installation of the system may result in
damage to property and, as a result, to bodily injury.
Therefore, we assume no responsibility or liability for loss, damage or
costs which result from, or are in any way related to, incorrect installation,
improper operation, or incorrect use and maintenance.
Similarly, we assume no responsibility for patent right or other right in-
fringements of third parties caused by usage of this system controller.
The manufacturer reserves the right to make changes to the product, tech-
nical data or assembly and operating instructions without prior notice.
Please note: Opening, manipulating or attempting to repair the device
or operating the device in an improper manner will invalidate all legal
guarantee claims.