ROHM RPP / RPP-A 2-jaw parallel gripper - Manual (Page 3)

Comparison: RPP; RPP-A
2-jaw parallel grippers
___________________________________________________________________________
ID 1104573 Operating Manual RPP; RPP-A
Röhm GmbH, Dillingen Works Röhmstr. 6, 89407 Dillingen/Donau, GERMANY, Tel. (49)9071/508-0
Page 3 of 37
2-jaw parallel grippers, pneumatically actuated
RPP-A
Functional principle
•
Tried-and-tested T-slots for gripping under maximum load
•
Quick and efficient gripping
•
Centrical gripping of round and angular workpieces
•
Universal use by using different clamping jaws
•
Optimum use in series production
•
All sizes are available with two stroke lengths
•
Clamping force regulation by means of pressure change
•
Constant clamping force at the same pressure, and therefore high clamping precision
•
Compact, ergonomic form
•
Purge port to prevent contamination
•
Grippers can be installed on two gripper sides
•
Position polling possible by means of inductive sensors
•
Compressed air port via screw connection or direct port
•
Gripping force lock for outer or inner gripping as extra type
•
Base jaw / top jaw interface with T-slot, positioning pin and positioning hole