Setting up the appliance – Siemens TK76K573 User Manual
Page 41
39
de
en
Important: If the drip tray is not
in place, the appliance cannot be
switched on and no water flows
out of the coffee outlet� The mes-
sage
Replace drip tray
appears�
Do not press the power switch
while the appliance is operating�
First press the
on off button to
rinse the appliance� The power
switch switches automatically
to
O�
Setting up the appliance
1� Set the power switch to
l and press the
on off button�
1
2� The language selection is shown in the
display:
Sprache:
Deutsch
Start drücken
3� Press the retracted rotary knob (4)
and turn it to select the language in
which you want the display texts to
appear� The following languages can be
selected:
Deutsch
Português
English
Dansk
Pycckий
Norsk
Nederlands Suomi
Français
Česky
Italiano
Türkçe
Svenska
Magyar
Español
Ελληνικά
Polski
Български
4� Press
start stop (8)� The language
you selected is saved and the appliance
is in “energy saving mode”�
You can change the language setting at
any time (see “Displaying settings”)�
5� Deploy the appliance (see “Deployment
system”)�
6� Remove the water tank (12) by pulling
it upward, rinse and fill it with fresh cold
water. Do not fill above the “max” mark.
12
15
7� Replace the water tank and push it
firmly downward into place.
Fill the water tank with fresh water
every day� The tank should always
contain sufficient water for operat-
ing the appliance�
8� Fill the bean container (15) with coffee
beans (for preparation using ground
coffee, see page 41)�
9� Push the appliance back into the built-in
unit�