Siemens TK76K573 - Manual (Page 40)

38
de en
Deployment system
The appliance can be pulled out of the built-
in unit automatically� To do this,
► press (6) (appliance must be
switched on for this) or
► remove grate and pull on the handle
underneath which is now accessible:
The appliance now moves automatically
into deployment position 1� In this position
it can be filled with water, coffee beans,
ground coffee and cleaning / descaling
tablets, and the accessories on the right of
the appliance can be removed�
To pull the appliance out fully,
► press (6) again and pull the appli-
ance out by hand into position 2 or
► pull the appliance out fully by the
handle�
In deployment position 2 the brewing unit
can be removed and the grinding unit
adjusted�
Deployment Deployment
position 1 position 2
Then push the appliance back fully into the
built-in unit�
During the brewing process,
automatic deployment is
prevented�
Accessories
The fully automatic espresso machine has
special compartments for storing the acces-
sories and quick reference guide (21) with
the appliance� These are located on the
right side (13, 14) and are accessible when
the appliance is pulled out into deployment
position 1�
Operation
General
Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso ma-
chines� Do not use coffee beans that have
been glazed, caramelised or treated with
other additives containing sugar, since they
will block the brewing unit�
If the appliance is being used for the first
time or has not been operated for a long
period, the first cup of coffee will not have
the full aroma� When using the espresso
machine for the first time, you will achieve a
suitably thick and stable “crema” only after
the first few cups have been dispensed.
The factory settings of the fully auto-
matic espresso machine are programmed
for optimal performance� After approx�
30 minutes, the appliance will switch off
automatically� This setting, like many
others, can be changed (see “Auto off after”
under “Displaying settings”)�
Important: Only use the appli-
ance in frost-free rooms� If the
appliance has been transported
or stored at temperatures below
0 °C, wait at least 3 hours before
operation�