Siemens KI25RP60 - Manual (Page 23)

en
23
Operating tips
■
After the appliance has been switched
on, it may take several hours until the
set temperatures have been reached.
Do not put any food in the appliance
beforehand.
■
The sides of the housing are partly
heated slightly. This prevents
condensation in the area of the door
seal.
Setting the
temperature
Fig. "
The temperature can be set from
+2 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated on
the temperature display 4.
Super cooling
Super cooling sets the refrigerator
temperature to the coldest temperature
setting for approx. 6 hours. Then
the appliance automatically switches
to the temperature set prior to super
cooling mode.
Switch on super cooling mode, e.g.
■
before placing large quantities of food
in the refrigerator compartment.
■
for the fast cooling of drinks.
Switching on and off
Fig. "
Press “super” button 2.
The button is lit when super cooling
is switched on.
Note
When super cooling is switched on,
increased operating noises may occur.
Alarm function
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close
the door to switch off the warning signal.
Switching off the alarm
Fig. "
Press the alarm button 1 to switch off
the warning signal.
Usable capacity
Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. +