Matrix Orbital PK162-12 - Manual (Page 31)

Syntax Hexadecimal 0xFE 0xC2 [refID] [data]
Decimal 254 194 [refID] [data]
Parameters Parameter Length Description
refID 1 Character reference ID (0-7).
data 8 Character data.
Description Using this command you may create the custom characters. that will be
stored in memory bank zero, which will be used in the startup screen.
For more information about creating custom characters see Section 6.2
on page 24.
NOTES
• Changes only take place once the power has been cycled.
• This command is the same as sending CMD 254 / 193 / 0 / [ID] / [DATA]
Remembered Yes
6.6 Initialize Medium Number
Syntax Hexadecimal 0xFE 0x6D
Decimal 254 109
ASCII 254 “m”
Description This command will load the default medium number characters into the
volatile memory. If you have stored your own custom medium numbers,
use the ’Load Custom Characters’ command to load your custom char-
acter data into the volatile memory. This command will allow you to use
the ’Place Medium Numbers’ command.
Remembered No
6.7 Place Medium Numbers
Matrix Orbital PK162-12 27