Matrix Orbital GLK12232-25-WBL - Manual (Page 26)

Figure 9: Bitmaps for h, i, and j
Now the bitmaps have to be converted to bytes. If the font is 8 bits high, this is a pretty simple job
because each vertical column is simply one byte (lsb at the top). In this case however, the font is only 7 bits
high so the bytes "wrap around" as shown in the Figure below.
Figure 10: Bytes For a 7 Bit High Font
We’ve marked in the bits that are set for the letter "h". Remember that the bytes are ’inverted’, i.e., the
LSB is at the top. Each byte is shown in a different colour in the diagram. When the bytes are straightened
out, it’s simple enough to find their hex values, which are shown in the diagram above each byte. Trailing
zero bytes at the end of narrow characters are not included in the file.
Table 7: Example of a File Font
0xFF 0xFF 0X05 0x07 0x68 0x6A 0x00 0x0F
0x05 0x00 0x14 0x03 0x00 0x17 0x04 0x7F
0x04 0x81 0x80 0x07 0xC4 0x3E 0x10 0x02
0x20 0xB1 0x07
The colours refer to: Font information header , character ’h’ , character ’i’ , character ’j’ .
Matrix Orbital GLK12232-25-WBL 22