Menu: system, Registration code, Registering the telephone to the dect system – Avaya 3711 User Manual
Page 53: Selecting the dect system
Menu: System
Issue 4 October 2008
53
Menu: System
Registration Code
The telephone can be manually registered on up to 10 different DECT systems. Before you can
make a call via the DECT system, the telephone has to be registered to the system. A system
ID and registration code are necessary for the registration process. When the telephone is not
subscribed to the system the display will show ”Please, subscribe”.
This is for information only. Please contact your System Administrator to register the telephone.
All settings in this chapter are started by pressing the softkeys:
Menu
System OK
Registering the Telephone to the DECT System
Subscription OK Options
New / OK IPEI: 012......OK PARK OK
PIN Authentication code OK System
name
OK
Local phone number OK
The following entries must be made when logging on:
Enter PARK: A system ID should only be entered if you are at a location where two DECT
systems overlap. If only one DECT system is available, then just press OK.
Enter Auth.Code: This code is used to get access to register the telephone (authentication
code). The DECT System supplies this code.
Enter System Name: Enter the name of the DECT system which you are registering. This
will be shown on the idle display. For information concerning the entry of characters, refer to
Enter Local Number: the phone number, assigned to your DECT telephone can be
entered here (ask your system administrator for the phone number).
Selecting the DECT System
Subscription OK
select a System Options Select OK
If the telephone has been registered to several DECT systems, then you can select which one
the telephone is to be used with. Select the system via the arrow keys before confirming
”Select”. By choosing Options Select, the function automatic search is disabled. The selected
system is shown in the idle display.