MagTek P-SERIES USB User Manual
P-series usb, Insertion reader, Technical reference manual
Table of contents
Document Outline
- Section 1. Features and Specifications
- Section 2. Installation
- Section 3. Operation
- section 4. USB Communications (HID)
- HID Usages
- Report Descriptor
- Card Data
- Track 1 Decode Status
- Track 2 Decode Status
- Track 3 Decode Status
- Track 1 Data Length
- Track 2 Data Length
- Track 3 Data Length
- Card Encode Type
- Track Data
- Track 1 Data
- Track 2 Data
- Track 3 Data
- Card Status
- Commands
- Command Number
- Data Length
- Data
- Result Code
- Get and Set Property Commands
- Software ID Property
- Serial Num Property
- Polling Interval Property
- MSR Direction Property
- Card Inserted Property
- Max Packet Size Property
- Interface Type Property
- Track ID Enable Property
- Reset Device Command
- Section 5. USB Communications (KB)
- Host Applications
- Card Data
- Programmable Configuration Options
- Low Level Communications
- Hid Usages
- Report Descriptor
- Commands
- Command Number
- Data Length
- Data
- Result Code
- Get and Set Property Commands
- Software ID Property
- Serial Num Property
- Polling Interval property
- Track ID Enble Property
- Track Data Send Flags Property
- Termination Char Property
- SS_Tk2_7bits Property
- SS_Tk3_ISO_ABA Property
- SS_Tk3_AAMVA Property
- SS_Tk3_7bits Property
- Pre Card Char Property
- Post Card Char Property
- Pre Tk Char Property
- Post Tk Char Property
- ASCII tO Keypress Conversion Type Property
- Interface Type Property
- Active Keymap Property
- Pre Card String Property
- Post Card String Property
- SS_Tk1_ISO_ABA Property
- SS_Tk2_ISO_ABA Property
- ES Property
- MSR Direction Property
- Card Inserted Property
- Sensor Blocked Char
- Sensor Unblocked Char
- ES_Tk1 Property
- ES_Tk2 Property
- ES_Tk3 Property
- Reset Device Command
- Get Keymap Item Command
- Set Keymap Item Command
- Save Custom Keymap Command
- Section 6. Demo Program
- Appendix A. Usage ID Definitions
- Appendix B. Modifier Byte Definitions
- Appendix c. Mechanical Drawing for Mounting