Videotec DTRXDC - Manual (Page 23)

Page. 3 DTRXDC 2900
Operating data on the rating plate
The DTRXDC receiver is supplied with two rating plates in conformity with the EC standards.
The first plate contains:
• Modell identification code (Extended 3/9 bar code)
• Power supply (Volt)
• Frequency (Hertz)
• Consumption (Watt)
The second plate indicates the serial number of the model (Extended 3/9 bar code).
During the installation phase, make sure that the power supply features of the receiver correspond to the
characteristics required. The use of unsuitable devices can lead to serious risks for the safety of the personnel and the
security of the plant.
Description of the DTRXDC receiver
The DTRXDC receiver is a microprocessor-based command receiver for the remote control of Pan & Tilt,
motorized lenses and auxiliary functions.
Features
• 13 Functions: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS
OPEN, IRIS CLOSE, AUX1, AUX2
• 2 dry contacts: range 1A 230 V~, 1A 24V
# (AUX1, AUX2)
• 99 selectable addresses selectable by dip-switch
• Serial input selectable between RS-232 and RS485
• Selectable communication speed (9600 / 2400 / 1200 / 300 Baud)
• RS232 and RS485 repeater for in-cascade configuration
• Possibility of using both polarity inversion lenses and common wire lenses
• Digital logic and part of optoisolated power
• Management of 14 preset positions (Pan & Tilt, lens)
• Led indicating power supplied to the unit
• EEPROM for the storage of active options
• Trimmer for the adjustment of the lens voltage (6V
=
- 16V
=
)
• PRESET / SCAN / PATROL functions, 4 alarm contacts
• Power supply: 230 V~ 50/60 Hz
• Consumption: 40 W
• Power supplied to the Pan & Tilt: 24 V
=
• Power supplied to the lens: adjustable 6V - 16 V
=
max 80mA
• Fuses F1: 630 mAF 250V
Compatible devices for the use with the DTRXDC receiver
• DCS3: control keyboard.
• PTH355P: variable speed Pan & Tilt
Refer to the relevant user manual for the complete description of the unit features.