Videotec ULISSE COMPACT HD - Manual (Page 26)

EN - English - I
nstruc
tions manual
26 MNVCUCHD_1405_EN
8.2.14 Tools
From menu entry Tools it is possible to re-set the
predefined values for the entire configuration of Pan
& Tilt or only for a number of specific sections.
This section:
• Update the firmware of the device.
Restart the pan & tilt.
Fig. 48
8.2.15 Factory Default
To restore the factory settings relative to the network,
user access and camera configuration follow this
procedure:
• Switch off the unit.
• Open the configuration door (6.2.1 Opening the
configuration door, page 15).
• Set all DIP 3 dip-switches to ON.
• Power the unit. Wait for 2 minutes.
• Switch off the unit.
• Restore the NETWORK protocol in DIP 3.
• Power the unit.
Enter address: 192.168.10.100.