Teledex Y Series - Manual (Page 6)

6 www.teledex.com Y SERIES EXA100 USER GUIDE
Chapter 2 Installation
2.1 Front Panel
The figure below shows the front panel of the
device.
2.2 LED Status
LED Status Descriptions
Power
Solid
OFF
System is powered off
or system status is
abnormal or disabling
‘LED ON’ in web UI
Solid ON System is operational
Wireless
Link
Solid
OFF
Wi-Fi is disabled or
disabling ‘LED ON’ in
web UI
Solid ON Wi-Fi is operational
Flashing
Data transmission
through Wi-Fi
2.3 Rear Panel
The figure below shows the rear panel of the
device.
Caution 1: If the device fails to power up, or it
malfunctions, first verify that the
power cords are connected securely
and then power it on again. If the
problem persists, contact technical
support.
Caution 2: Before servicing or disassembling
this equipment, disconnect all power
cords and telephone lines from their
outlets.
2.4 Reset Button
Restore the default parameters of the device by
pressing the Reset button for five to ten seconds.