beautypg.com

Operation – Teledex E Series User Manual

Page 20

background image

20

www.teledex.com

E SERIES ANALOG USER GUIDE

3. Activate the conference call by pressing

the Conf key which will join the calls
together.

TO TERMINATE A CONFERENCE CALL

Pressing a line key will maintain the connection
with that line while dropping the other line. To
terminate the call entirely, place the handset
back in the cradle to go on-hook and disconnect
both parties.

5.

FLASH Key: Generates a 600 ms (0.6
seconds) hook switch “tap” signal.
Utilized to access special features on
PBX systems. The Flash function is
programmable at 100 ms to 1000Ms
(default is 600 ms). This button is located
underneath the faceplate.

6.

REDIAL Key: Redials the last-dialed
telephone number, up to 32 digits.

7.

MUTE Key: Sets the microphone Mute
function On and Off. The LED indicator
above the [Mute] key displays the On/
Off status of the Mute function. When
Mute is On, the handset and hands-free
microphone audio is turned off. You will be
able to hear the party at the other end of
your call, but they will not be able to hear
you.

8.

HOLD Key: Controls the “local hold”
function. Each press of the [Hold] key
toggles the local hold mode on or off. An
LED indicator located above the [Hold] key
displays the on-hold status

9.

SPEAKER Key: Sets the hands-free
speakerphone function On or Off. The
LED indicator located above the [Speaker]
key displays the On/Off status of the
speakerphone.

10.

STORE Key: Utilized to program the speed-
dial memory keys and the voice mail
retrieval touch bar. This button is located
underneath the faceplate.

11.

Data Port: Provides a convenient extension
of the connected telephone line for
connecting a device such as a modem, fax,
or answering machine.

Operation

VOLUME

HANDSET AND SPEAKER VOLUME CONTROL

The handset volume control increases the volume
of the handset.

When the handset is off-hook or the Speaker
key is engaged on the speakerphones, press
the volume control keys to increase or decrease
the volume. The handset volume control is an
8-step operation. All models are hearing aid
compatible.

RINGER VOLUME CONTROL

The ringer volume control switch is on the bottom
side of the phone.

The setting is either Low or HI (High).

INDICATORS

SPEAKER AND MUTE KEY CONNECTING AND
STATUS INDICATORS

Speakerphones are equipped with LED indicators
to show the current feature key status.

• Press Speaker or Mute feature key to use that

service—the LED will light red when that key
is IN USE.

CALLING

PLACING A CALL USING THE HANDSET

• Lift the handset.
• Dial out by using the numeric dial pad or by

pressing a speed dial location.

E200 AND E200TRM PHONES