Texsport 15155 Picnic Table Set - Manual (Page 2)

STEP 14 - Lay storage bag
out and separate the
hook ‘n’ loop straps. STEP 13 - Flip table over
and slide the locking
device to secure legs. STEP 15 - Lay bench onto
the storage bag and
secure bench using the
hook ‘n’ loop straps.
STEP 16 - Enjoy your
picninc table set.
MODEL: PICNIC TABLE SET
ITEM 15155
MADE IN CHINA
WF11
ZIPPERS:
If zippers stick, lubricate with silicone. Never force a zipper which has material
caught in it, as this will bend the slider and prevent the zipper from closing.
Continual use in a sandy environment can cause the slider to erode and fail to
close the zipper.
STORAGE:
Picnic table set should be stored dry and away from heat and water. Never store
directly on concrete, as moisture and chemicals in concrete may damage the
carry/storage bag.
WASHING:
Hand wash with a sponge, using a mild soap. Never use detergents or washing
machines as they may damage the seams.
QUESTIONS:
If you should have any questions, problems or comments, please call our Cus-
tomer Service Department at
1-800-231-1402
or e-mail [email protected]. This Department is open
M–F from 8 a.m.–5 p.m. CST.
STEP 11 - Swing out the
end table top support
arm. Pull table slats out
slightly and insert support
arm into the molded joint. STEP 10 - This is what
your table look like at
this point. STEP 12 - Turn the center
table top support arm
and snap into the molded
joints.
15155 Instruction Sheet 10-10_Layout 1 10/12/10 8:37 AM Page 2