Texsport 02845 Wendover Screen Arbor - Manual

ASSEMBLY INSTRUCTIONS
Item 02845 - Wendover Screen Arbor
Thank you for buying a Texsport Authentic Adventure Gear Product. We hope you enjoy your new arbor and that it will serve you with
many years of camping pleasure. We encourage you to read and understand each step of the set-up instructions prior to working with
the arbor.
Do not apply excessive force to this product.
PARTS LIST:
DESCRIPTION . . . . . . . . . . . . . . . . .QTY. . . . . .PART NO.
Gray Center Roof Joints . . . . . . . .2 EA.
White corner Roof Joints . . . . . . .4 EA.
Screen Arbor Skin . . . . . . . . . . . . .1 EA.
Plastic Stakes . . . . . . . . . . . . . . .12 EA.
Steel Roof Poles . . . . . . . . . . . . . .4 EA. . . . . .#1
Steel Roof Poles . . . . . . . . . . . . . .4 EA. . . . . .#2
Steel Roof Poles . . . . . . . . . . . . . .4 EA. . . . . .#3
Steel Eaves Poles . . . . . . . . . . . . .8 EA. . . . . .#4
Steel Eaves Poles . . . . . . . . . . . . .4 EA. . . . . .#5
Steel Eaves Poles . . . . . . . . . . . . .2 EA. . . . . .#6
Steel Leg Poles . . . . . . . . . . . . . . .4 EA. . . . . .#7
Steel Leg Poles . . . . . . . . . . . . . . .4 EA. . . . . .#8
Steel Peak Poles . . . . . . . . . . . . . .1 EA. . . . . .#9
Steel Poles with Plastic Rings . . . . .2 EA. . . . . .#10
Steel Poles with Plastic Rings . . . . .2 EA. . . . . .#11
ASSEMBLY INSTRUCTIONS
Step 1 . .Connect #10 and #11 poles together. Insert #9 pole
through both #10 poles. Put on gray center roof
joint.
Step 2 . .Put #6 poles through #11 poles.
Step 3 . .Connect #1, #2, and #3 poles to center roof joints.
Put white corner joints on the end of #3 poles.
Step 4 . .Connect #4, #5, and #4 poles, and #4, #5, #6 and
#4 poles. Connect pole sections to the corner joints
as illustrated in Fig. 1.
Step 5 . .Connect #7 poles to corner joints
Step 6 . .Pull arbor skin over frame, then connect #8 poles to
#7 poles.
Step 7. . .Pull arbor skin tight over frame and secure inside
with velcro strops. Then connect T-clips to holes in #8
poles and attach foot pads to #8 poles.
Step 8 . .Secure arbor to the ground using the included guy
ropes and clews. Instructions on reverse.
SOME ADDITIONAL INFORMATION:
Make sure you stake the shelter (with the stakes included) in windy weath-
er, or if you anticipate afternoon winds coming up while you are away
from your campsite. Stake one corner, then stake each consecutive corner
in a clockwise rations. After staking the corners return and stake any other
stake loop positions if applicable. Always place your shelter a safe dis-
tance from your campfire - unstaked shelters placed upwind of the fire can
be blown into the fire.
9
1
2
3
4
6
4
4
11
10
11
10
5
4
4
7
8
9
10
11
10
5 6
5
6
4
4
5
4
4 6 5 4
5
4
5
4
Fig. 1
Please see reverse side for more valuable information