Texsport 01085 Hilo Hut Shelter - Manual

INSTRUCTIONS
Item 01085
Hilo Hut Privacy Shelter
Thank you for purchasing this Texsport shelter. Please read and understand each step of the set-up instructions. We encourage you to set-up this
shelter at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy
your new shelter and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......1 Shelter skin
B ......4 Sets of thick leg poles
C ......2 Sets of thin roof poles
D ......Stakes, clews and
guy ropes
NOTE:
Prepare your camp site by removing all
sharp stones, twigs, etc. The site should
be flat and have no depressions that
could collect rain water.
A
B
C
D
STEP 4 - Insert the thin roof pole
into the thick leg pole. STEP 5 - Insert the pin and ring at
the bottom of this pole. Repeat
STEP 3 & 4 for the opposite leg
pole, and insert pin and ring. STEP 6 - Repeat STEP 3. 4 and 5 for
the other 2 legs poles. Tie the thin
roof poles with attached ties to
secure.
STEP 1 - Spread out shelter skin. STEP 2 - Assemble the 2 sets of
thin roof poles and push them
through the roof sleeves. STEP 3 - Assemble one thick leg
pole. Start at the bottom of the
shelter skin and push it up through
the sleeve.
STEP 7 - Stake down all 4 corners
of the shelter at the rings. STEP 7 - Snap the speed clips onto
the thick leg poles of the shelter.
STEP 8 - This is what your shelter
should look like.