Texsport 01109 Brookwood Tent - Manual

INSTRUCTIONS
Item 01109
Brookwood Internal Frame Tent
Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......1 Tent Skin
B ......2 Long Shock-corded
Fiberglass Poles
C ......1 Short Rainfly Pole
D ......Stakes
NOTE:
Prepare your camp site by
removing all sharp stones, twigs,
etc. The site should be flat and
have no depressions that could
collect rain water.
A
B
C
D
STEP 1 - Spread the tent skin and
assemble the 2 long tent poles.
STEP 4 - Climb inside the tent and
secure all poles to the attached
ties.
STEP 2 - Take one long pole and
slide it inside the tent making
sure to put the tip of the pole into
the back left corner and the other
end of the pole into the right
front corner.
STEP 5 - Slide rainfly pole under
the rainfly BUT over the mesh
screen. STEP 6 - Secure the rainfly pole
by inserting the ends into the
small pockets.
STEP 3 - Repeat step 2 for the re-
maining pole. Put the tip into the
back right corner and the other
end into the front left corner.
STEP 7 - Stretch and stake the
tent at all corners. STEP 8 - Your assembled tent is now ready.