Texsport 01102 Riverstone Tent - Manual

INSTRUCTIONS
Item 01102
Riverstone Square Dome Tent
Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......Tent skin
B ......Fly awning pole
C ......Fly pole
D ......2 Sets of tent poles
E ......Stakes
NOTE:
Prepare your camp site by removing all sharp
stones, twigs, etc. The site should be flat and have
no depressions that could collect rain water.
A
B
C
D
E
STEP 1 - Spread out tent skin. STEP 2 - Assemble the tent poles (D)
and insert through the tent sleeves. STEP 3 - Your poles should form an
X as shown above.
STEP 5 - Tie poles at the top of the
tent. STEP 4 - Insert the pin and ring
into the tent poles on all 4 corners. STEP 6 - Stake down at the ring.
STEP 7 - This is what your tent
should look like to this point. STEP 8 - Spread out the fly bottom
side up. STEP 9 - Assemble fly awning pole
(B) and push through the fly sleeve.
STEP 12 - Drape fly over tent and in-
sert the awning pole into the grom-
mets on tent skin to create an arch.
STEP 11 - Tie pole to the fly skin to
secure.
STEP 10 - Assemble the fly pole (C)
and insert into web pockets.