Texsport 01107 Pebble Creek Tent - Manual

INSTRUCTIONS
Item 01107
Pebble Creek Vestibule Tent
Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......Tent skin
B ......1 fly pole
C ......4 sets of tent poles
D ......Stakes, guy ropes and clews
NOTE:
Prepare your camp site by removing all sharp
stones, twigs, etc. The site should be flat and have
no depressions that could collect rain water.
A
B
C
D
STEP 1 - Spread out tent skin. STEP 2 - Assemble the tent poles
(C) and insert through the tent
sleeves. STEP 3 - Your poles should form
double X as shown above.
STEP 5 - Your tent poles should
cross at the sides. STEP 4 - Insert the pin and ring
into the tent poles. STEP 6 - Your roof poles should
form 2 large X’s.
STEP 7 - Secure skin by snapping
all speed clips onto the outer most
tent pole. STEP 8 - Stake down at the ring. STEP 9 - Spread out the fly bottom
side up.