Texsport 01323 Sequoia Pass Tent - Manual

INSTRUCTIONS
Item 01323
Sequoia Pass 3-Room Family Cabin Tent
Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......Tent skin
B ......2 Sets eave poles
C ......4 Sets of short chain-corded side
leg poles
D ......2 Sets of long chain-corded center
leg poles
E ......2 Long adjustable base poles
F ......1 Curved roof pole
G ......1 Curved chain-corded roof pole
H ......Stakes, clews, and guy rope
NOTE:
Prepare your camp site by removing all sharp
stones, twigs, etc. The site should be flat and have
no depressions that could collect rain water.
A
B
C
D E
F
G
H
STEP 1 - Spread out tent skin. STEP 2 - Assemble the tent poles (B)
and insert through the side eave
sleeves. STEP 3 - Insert the eave pole (B) into
the small opening of the attached
molded joint on both ends.
STEP 5 - Assemble a short chain-corded
side leg pole (C) and insert into the
opening of the attached molded joint.
Make sure the small hole on the pole is
at the top. STEP 4 - All chain-corded poles have a
locking tab. Make sure when assem-
bling the poles the locking tab is in
place as shown above. STEP 6 - Insert the pin and ring into the
side leg poles on all 4 sides.