Texsport 14262 Hammock Stand User Manual
Page 2
STEP 5 - This is how your stand should look.
STEP 2 - First, connect part B to part C and set aside. Then connect part A to remaining part C.
Lastly, connect part A to part B.
STEP 3 - Connect remaining part B to Part C. Then connect remaining part A to parts B and C.
STEP 4 - Insert S hooks (D) into holes located at the top of part A.
MAINTENANCE
1. For best results and longer life, store your stand out of the weather to reduce possible rust problems.
2. BEFORE EACH USE, INSPECT ALL MOUNTING HARDWARE, STAND PARTS, POINTS OF CONNECTION AND YOUR
HAMMOCK FOR INDICATIONS OF TEAR OR DEFECTS, REPLACE ALL WORN PARTS PRIOR TO USE OF YOUR
STAND OR HAMMOCK.
3. Should the painted surface become scratched or chipped, obtain a matching paint and touch up spots where the under-
lying metal is exposed to inhibit rust.
CAUTIONS AND WARNINGS
DO NOT allow the connections (where one part inserts into another part) to become loose or less than totally inserted. In-
spect prior to every use, to make certain that one part is fully inserted into the other part.
DO NOT EXCEED THE SUGGESTED WEIGHT LIMIT FOR YOUR HAMMOCK STAND
QUESTIONS:
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1402 or e-mail [email protected]. This Department is open M–F from 8 a.m.–5 p.m. CST.
MODEL: STEEL HAMMOCK STAND
ITEM 14262
MADE IN CHINA
(BR42)10