Texsport 14263 Deluxe Hammock Stand - Manual (Page 2)

STEP 2 - Insert an end pole with end cap (B) into the opposite end of the foot bracket. Make sure
the holes at the top of the poles face each other when they are inserted into position.
STEP 3 - Place an “S” hook (Part D) in each of the top holes in Part B.
STEP 4 - This is how your stand should look.
MAINTENANCE
1. For best results and longer life, store your stand out of the weather to reduce possible rust problems.
2. BEFORE EACH USE, INSPECT ALL MOUNTING HARDWARE, STAND PARTS, POINTS OF CONNECTION AND YOUR
HAMMOCK FOR INDICATIONS OF TEAR OR DEFECTS, REPLACE ALL WORN PARTS PRIOR TO USE OF YOUR
STAND OR HAMMOCK.
3. Should the painted surface become scratched or chipped, obtain a matching paint and touch up spots where the
underlying metal is exposed to inhibit rust.
CAUTIONS AND WARNINGS
DO NOT allow the connections (where one part inserts into another part) to become loose or less than totally inserted.
Inspect prior to every use, to make certain that one part is fully inserted into the other part.
DO NOT EXCEED THE SUGGESTED WEIGHT LIMIT FOR YOUR HAMMOCK STAND
QUESTIONS:
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1402 or e-mail [email protected]. This Department is open M–F from 8 a.m.–5 p.m. CST.
MODEL: DELUXE STEEL
HAMMOCK STAND
ITEM 14263
MADE IN CHINA
(BR42)10