Texsport 01107 Pebble Creek Tent User Manual

Page 2

STEP 12 - Secure fly to tent with
attached buckels. Pull or loosen
web straps to adjust tension.

STEP 13 - Stake out the vestibule.

STEP 14 - Stake out the mud mat
at the 2 corners.

STEP 12 - Drape assembled fly
over tent and insert the pin and
rings into the fly pole.

STEP 11 - Secure pole to fly with
attached velcro.

STEP 10 - Assemble the fly pole (B)
and push through the sleeve.

STEP 15 - It is recommended in
windy weather to secure your tent
with guy ropes. Insert the guy
rope into clew as shown above.

STEP 16 - Tie the other end of the
guy rope to the tabs on the fly.

STEP 17 - Loosen the guy rope as
shown to wrap around a stake.

STEP 18 - Stake down the guy
rope.

STEP 19 - Adjust the tension on the
guy rope by sliding the clew up or
down.

See also other documents in the category Texsport Sports and recreation: