Kenwood KDC-461U - Manual (Page 6)

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
7 Press and hold
to exit.
To return to the previous setting item or hierarchy, press .
Set the initial settings
1 Press B SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default: XX
AUDIO CONTROL
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination remain
as [COLOR SELECT] color. ( 9)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset
button, regardless of the selected band.
GETTING STARTED
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8)
RUSSIAN SET Selects the display language for [FUNCTION] menu and Tag information
(folder name, file name, song title, artist name, album name) if
applicable.
OFF: Display language is English. ; BКЛ: Display language is Russian.
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turns off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
WAIT TIME – – –: Cancels
CD READ 1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as an music CD. No sound can be heard if an audio file
disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial
telephone accessory. ( 13)
When a call comes in, “CALL” appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press B SRC.
“CALL” disappears and the audio system resumes.
When the call ends, “CALL” disappears. (The audio system resumes.)
3
JS_KWD_KDC_461U_EWE0_01_EN.indd 4 JS_KWD_KDC_461U_EWE0_01_EN.indd 4 10/12/2013 1:07:31 PM 10/12/2013 1:07:31 PM