Kenwood BDR-A7 User Manual

Page 9

English

CONNECTING TO NETWORK

• You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-LIVE compatible

discs on the BD player.

• Connect the ETHRNET (10/100) connector of this unit to your internet source.

■ Notes :
• After making a broadband internet connection, you should set the communication setting. (For details, refer to “SETTING

THE NETWORK” on page 45.)

• When using a broadband internet connection, a contract with an internet service provider is required. For more information,

contact your nearest internet service provider.

• Refer to the operating instructions of the equipment because the connected equipment and connection method may differ

depending on your internet environment.

• Use a LAN cable/router supporting 10 BASE-T/100 BASE-TX.
• Some LAN cables are easily affected by noise.
We recommend using a shield type cable.

COOLING FAN

• Cooling fan operates to prevent the temperature inside this unit from rising. To allow for proper ventilation, maintain a certain

space behind this unit.

■ Note :
• While the fan is operating, the faint fan noise may be generated.

AC INPUT

• Plug this cord into a wall AC outlet.

CAUTION (Notes on the AC power cord and the wall outlet)

• The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit

has been turned off.

• To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet.
• When setting up this product, make sure that the AC outlet you are using is easily accessible.
• Disconnect the plug from the wall outlet when not using the unit for long periods of time.

Broadband router

Modem

Internet

BDR-A7_EN_CS3.indb 9

11.3.10 6:59:34 PM