Kenwood BDR-A7 - Manual (Page 20)

20
English
F LARGE* / SMALL
C LARGE* / SMALL / NO
S LARGE* / SMALL / NO
SB LX2 / LX1 / SX2 / SX1 / NO*
SW YES* / PLUS / NO
SPK CFG
X OVER X OVER 50 / 80 / 100* / 150 / 200
CH LEVEL
DISTANCE
T TONE M* / A L 0 dB* / -15 ~ +15
C 0 dB* / -15 ~ +15
R 0 dB* / -15 ~ +15
SR 0 dB* / -15 ~ +15
SBR 0 dB* / -15 ~ +15
SBL 0 dB* / -15 ~ +15
SL 0 dB* / -15 ~ +15
SW 0 dB* / -15 ~ +15
L 3.0 M* / 0.1 ~ 9.0
C 3.0 M* / 0.1 ~ 9.0
R 3.0 M* / 0.1 ~ 9.0
SR 3.0 M* / 0.1 ~ 9.0
SBR 3.0 M* / 0.1 ~ 9.0
SBL 3.0 M* / 0.1 ~ 9.0
SL 3.0 M* / 0.1 ~ 9.0
SW 3.0 M* / 0.1 ~ 9.0
Setting the speaker setup
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustic according to your environment and speaker layout.
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should
adjust the speaker settings, too.
• Settings with* are the default.
• SPK CFG (SPEAKER CONFIGURATION) : To adjust the speakers depending on whether they are connected or not.
• X OVER (CROSSOVER FREQUENCY) :
To select the desired crossover frequency.
• CH (CHANNEL) LEVEL : To adjust each channel level with the test tone.
• DISTANCE (SPEAKER DISTANCE) : To select the distance between the listening position and each speaker to
set the delay time automatically for optimum surround playback.
BDR-A7_EN_CS3.indb 20 BDR-A7_EN_CS3.indb 20 11.3.10 6:59:36 PM 11.3.10 6:59:36 PM