Kenwood DNX520VBT User Manual

Page 62

62 DNX520VBT

Setup Menu

Security Setup

You can set a security code to protect your
receiver system against theft.

⁄

• When the Security Code function is activated, the code

cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.

Display the Security screen

Touch [

]

[

]

[System]

[Security].

(page 57)

Setup the SI (Security Indicator)

[Security Code Set] Displays the Security code

input screen.

[SI] Turns the SI function on or off.

If turned "ON", the Security indicator on the
front panel flashes when the vehicle ignition is
off. (

"ON")

Start Security Code setup

⁄

If you have already completed the code registration,

•

[CLR] is displayed.

Enter a security Code

Input four-digit number.

Register your security code

Reenter the security code

Reenter the same security code as that you have
entered in Step 4 for confirmation.

⁄

If you enter a different security code, the screen

•

returns to Step 4 (for the first code entry).

Register the security code again

Now, your security code is registered.

If you have pressed the Reset button or if you
have disconnected the Receiver from battery...

Enter the correct security code

You must enter the same security code as that
you have entered in Step 4.

Register your security code

Now, you can use your Receiver.

B64-4644-00_00_VW_E_En.indd 62

09.12.22 2:43:21 PM