Radio listening – Kenwood DNX520VBT User Manual
Page 32
32 DNX520VBT
Radio Listening
Source Control Screen
Switches to the source control screen to use
various functions.
Display the Source
1
Control Screen
See
Operation on the Source Control Screen
2
1
1
1
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On
or Off.
See
[
4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency.
[List] Display the Tuner Preset List screen. See
1 Information display
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus,
or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[
] When
appears, the text display is
scrolled by touching it.
Various control screens appear in the Tuner Source mode.
Multi Function
[1/3] Switches the multi function display.
[
] Closes the multi function bar.
[
] Opens the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
Setting
"AUTO1"
Tunes in a station with good reception automatically.
"AUTO2"
Tunes in stations in memory one after another.
"MANU"
Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[PTY]
FM
FM
Searches station by program
type.
See
[Mono]
FM
FM
Selects the Monaural
reception.
[LO.S] Turns the Local Seek function ON or OFF.
[TEXT]
FM
FM
Displays Radio Text screen.
See
B64-4644-00_00_VW_E_En.indd 32
B64-4644-00_00_VW_E_En.indd 32
09.12.22 2:43:03 PM
09.12.22 2:43:03 PM