Kenwood DNX520VBT User Manual
Page 48
48 DNX520VBT
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
Display the Hands-Free Control screen
1
See
Display the Hands Free Setup screen
2
Set each item
3
[Auto Response] Sets an automatic response
time to pick-up an incoming call.
(
"OFF")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Call Beep] Sets the beep of the incoming call.
(
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. (
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
(
"ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function. (
"ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See
[Use Phone Voice Recognition]
Sets whether to dial using the phone voice
recognition function. (
"ON")
[Echo Cancel Level] Adjusts the level of echo
cancelling function. (
"15")
[Microphone Level] Adjusts the sensitivity of
the microphone for a telephone call. (
"8")
[Noise Reduction Level] Adjusts the level
of the noise reduction and the quality of the
resulting speech signal. (
"4")
[Restore] Restores the [Echo Cancel Level],
[Microphone Level], or [Noise Reduction Level]
value to the initial value.
⁄
Either the time interval for automatic answer set on this
•
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
Hands-Free Phoning
B64-4644-00_00_VW_E_En.indd 48
B64-4644-00_00_VW_E_En.indd 48
09.12.22 2:43:13 PM
09.12.22 2:43:13 PM