Kenwood DNX520VBT - Manual (Page 56)

56 DNX520VBT
Audio Control
Zone Control
You can set the front and rear audio source.
Display the Zone Control screen 1
Touch [ ] > [ ] > [Zone Control]. (page 54)
Set the Zone Control 2
[Single Zone] Sets the unit to single zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
When the rear speaker sound is switched, the audio •
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
There are following limitations when zone function is set •
to "ON".
- There is no output from the subwoofer.
- (page 55) and
(page 71) are not available.
B64-4644-00_00_VW_E_En.indd 56 B64-4644-00_00_VW_E_En.indd 56 09.12.22 2:43:18 PM 09.12.22 2:43:18 PM