Kenwood BD-7000 - Manual (Page 36)

Settings During Playback
Functions which can be set
• Shows the title number being played back (or track number when playing back an audio
CD). You can skip to the start of the title (or track).
• To skip to the start of a selected title (or track), press the Number buttons to enter the
title (or track) number when this option is highlighted.
• Shows the chapter number being played back. You can skip to the start of the chapter.
• To skip to the start of a selected chapter, press the Number buttons to enter the
chapter number when this option is highlighted.
• Shows the time elapsed from the beginning of the current disc title (or track). This lets
you skip to a specific time.
• Press c/d to select the Hour, Minute or Second, then press a/b or the Number
buttons to set the time. Press ENTER to start playback at the set time.
• Shows the currently selected subtitle language. If subtitles are provided in other
languages, you can switch to your preferred language.
• Shows the currently selected type of audio. You can select the desired type of audio.
• The current Title (or Chapter) or partial segments can be repeatedly played back. Repeat
Playback is also possible with the REPEAT button on the remote control.
• Shows the currently selected angle number. If the video is recorded with multiple angles,
you can switch the angle.
NOTE
• These functions may not work with all discs.
NOTE
• ENTER button under the Cover: Enters the input number.
• CLEAR button under the Cover: Clears the input number.
35
Playback
Title/Track Number (Direct Title/Track Skip)
Chapter Number (Direct Chapter Skip)
Playback Elapsed Time (Direct Time Skip)
Subtitle Language
Audio
Repeat
Angle Number
BD-7000_CD-ROM_en_r2.6.indd 35 BD-7000_CD-ROM_en_r2.6.indd 35 10/10/07 9:08 10/10/07 9:08