Kenwood BD-7000 - Manual (Page 31)

Video/Picture/Music Playback
Displaying Still Images (JPEG files)
CD-R CD-RW DVD-R DVD-RW USB
This Player can display still images (JPEG files)
recorded on CD-R/RW discs, DVD-R/RW discs and
USB memory devices.
• For details on the still images that you can display using
this player, refer to page 9.
• Still images are played one by one while during “Slide
show”, they are automatically replaced one after another.
Displaying Still Images (JPEG files)
When you insert or remove a USB memory device, be
sure to turn the main power off.
1 Load a disc or insert a USB memory device
containing Still Images (JPEG files), then press
HOME to display the menu screen.
2 Press a/b to select “Picture”, then press d or
ENTER.
3 Press a/b to select “DVD/CD*” or “USB
Memory Device”, then press d or ENTER.
* Display name varies depending on the type of media
inserted.
• If only a “DVD/CD” or a USB memory device is
inserted, the “DVD/CD” or “USB Memory Device”
selection screen does not appear. In such cases, after
step 2, proceed to step 4.
4 Press a/b to select a folder or file.
• When you select a folder, press ENTER to open it,
and then press a/ b to select a file in the folder.
5 Image 01.jpg
6 Image 02.jpg
1 Folder 1
2 Folder 2
3 Folder 3
4 Folder 4
1/All 14 files and folders
Folder 1
CD
NOTE
• Thumbnail data will be displayed when JPEG files from a
digital camera contain thumbnail data.
• An icon will be displayed for JPEG files which do not
contain thumbnail data.
• When data in the USB memory device is played back,
playback from the USB memory device will stop when m
on the remote control or the player is pressed or when a
disc is inserted into the player.
5 Press ENTER to display the selected file.
• The selected still image appears on the screen.
1/77
6 Press KSKIP or LSKIP/l to replace
one image with another.
• The same operation can be performed by pressing
S REV/V FWD.
• Press n RETURN if you wish to return to the
selection screen.
7 To stop the still image display at any time, press
H.
Playing back Slide Show
1 To play back Slide Show, in Step 6 of the
“Displaying Still Images (JPEG files)”, press
d (Play) (Slide Show).
• The still images inside the selected folder are played
as a slide show.
2 To pause the playback at any time, press F.
• Press d (Play) to return to playback of a slide show.
3 To stop the playback at any time, press H.
Setting slide show speed/repeat
playback
1 Press D (Blue) (Slide Show Menu) while the
selection screen is displayed.
• The setting screen for “Slide Show Speed”/“Repeat
Mode Setting” appears.
2 Press a/b to select “Slide Show Speed”, then
press d or ENTER.
3 Press a/b to select the desired speed, then
press ENTER.
• The slide show speed may be selected from “Fast”,
“Normal”, “Slow1” and “Slow2”.
4 Press a/b to select “Repeat Mode Setting”,
then press d or ENTER.
5 Press a/b to select the desired item, then
press ENTER.
• The desired item may be selected from “Yes” or “No”.
6 Press EXIT to exit.
30
BD-7000_CD-ROM_en_r2.6.indd 30 BD-7000_CD-ROM_en_r2.6.indd 30 10/10/07 9:08 10/10/07 9:08