Audio connection, Connecting to the digital audio terminal – Kenwood BD-7000 User Manual

Page 19

Audio Connection

Connecting to the Digital Audio Terminal

• You can connect audio equipment or the TV to the OPTICAL DIGITAL OUT terminal.
• For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection

table on page 44.

This Player

Audio equipment with a digital audio input terminal

STEPS

1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (

1 and 2).

After connecting

• If necessary, perform the Audio Video Settings. (Page 37)
• Prepare the desired disc or content and start playback. (Pages 24–30)

Amplifier

Optical digital cable
(commercially available)

To OPTICAL DIGITAL
OUT terminal

To OPTICAL DIGITAL
AUDIO IN terminal

• When using OPTICAL DIGITAL OUT,

5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.

NOTE:

7.1 ch Audio is available via the HDMI terminal.

NOTE

• Digital audio cannot be copied from the

OPTICAL DIGITAL OUT terminal.

BD-7000_CD-ROM_en_r2.6.indd 18

10/10/07 9:07