Kenwood BD-7000 - Manual (Page 18)

Connection
Video Connection
Connecting to the HDMI Terminal
• You can enjoy high quality digital picture and sound through the HDMI terminal.
• When you use HDMI CEC, make sure to use a certified HDMI cable.
• For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection
table on page 44.
This Player
Equipment with an HDMI terminal
NOTE
• Audio transmitted in DTS-HD High
Resolution Audio and DTS-HD Master
Audio formats is output from the
HDMI terminal as Bitstream. Connect
an amplifier with a built-in decoder to
enjoy the fine sound quality.
• When using an HDMI output, 7.1 ch
Digital Output is available.
17
Connection
HDMI cable
(commercially available)
1
2
To HDMI OUT
terminal
To HDMI IN
terminal
TV Projector AV receiver
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an HDMI cable (commercially available) to the HDMI terminals (
1 and 2).
After connecting
• If desired, connect audio equipment. (Page 18)
• If necessary, perform the Audio Video Settings. (Page 37)
• Refer to HDMI CEC function. (Pages 23 and 38)
• Prepare the desired disc or content and start playback. (Pages 24–30)
BD-7000_CD-ROM_en_r2.6.indd 17 BD-7000_CD-ROM_en_r2.6.indd 17 10/10/07 9:07 10/10/07 9:07