Kenwood BD-7000 - Manual (Page 21)

Before Starting Playback
Loading the Batteries in the
Remote Control
1 Hold in the tab on the battery cover and pull the
cover towards the direction of the arrow.
2 Load the two “AAA” size batteries (R-03 size,
UM/SUM-4). Place batteries with their terminals
corresponding to the
m and n indications in
battery compartment.
3 Insert the smaller tab of the battery cover into
the opening
1, and press down on the cover
until it clicks in place 2.
NOTE
• Do not subject the remote control unit to shock, water or
excessive humidity.
• The remote control unit may not function if the Player's
remote sensor is in direct sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst.
Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix different brands.
• Remove the batteries if you will not use the remote control
unit for an extended period of time.
¤ CAUTION
• Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater.
This can cause batteries to leak, overheat, explode or
catch fire.
It can also reduce the life or performance of batteries.
¢
¢ ¢
¢
Approximate operating range of
remote control
You can select the remote control sensor used
depending on the orientation of the player.
Playback
20
Remote control sensor
c Remote control unit
* Approx. 7 m from
the sensor
BD-7000_CD-ROM_en_r2.6.indd 20 BD-7000_CD-ROM_en_r2.6.indd 20 10/10/07 9:07 10/10/07 9:07