Kenwood DPX504U - Manual (Page 44)

44
| DPX504U/ DPX404U/ DPX304
Clock and Other Functions
“Power OFF Wait”/
“P-OFF WAIT”
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
“OFF”: Power OFF Timer function is OFF.
“20MIN/M”/ “40MIN/M”/ “60MIN/M”: Turns
the power OFF after minutes.
“Built in AUX”/
“BUILT-IN AUX”
When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
“Forced CD-DA”/
“CD READ”
Sets the CD read mode.
“Settings 1”/”1”: Automatically distinguishes
between Audio file disc and music CD when
playing disc.
“Settings 2”/”2”: Forces playing as music CD.
“Built in AMP”* Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“ON”/ “OFF”
“Switchable
Preout”/ “SWITCH
PREOUT”
Switches the preout between rear output and
subwoofer output.
“Rear”/ “REAR”: Rear output
“SubWoofer”/ “SUB-W”: Subwoofer output
“SP SELECT”** Fine-tuning so that the System Q value is
optimal when setting the speaker type as
follows;
“SP OFF”: Off
“SP 5/4”: For 5 & 4 in. speaker
“SP 6* 9/6”: For 6 & 6x9 in. speaker
“SP OEM”: For the OEM speaker
“System F/W
Update”/ “F/W
UP”
Upgrades the firmware.
Selecting “YES” and then pressing [VOL] knob
starts upgrading the firmware.
For how to update the firmware, access our web
site. http://www.kenwood.com/cs/ce/
( : Factory setting)
* Function of DPX504U
** Function of DPX404U/DPX304
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
Initial Settings
You can select the following Initial Setting items.
1
Select the Standby
Press the [SRC] button.
Select the “STDBY”/ “STANDBY” display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Initial Settings”/ “INITIAL SET”.
4
Select the setting item to adjust
Turn the [VOL] knob.
Display Overview
“Initial Settings”/
“INITIAL SET”
“Security Set”/
“SECURITY SET”
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned
off. Refer to
(page 46) .
“Source Select”* Sets the source selection method.
Select “2” to change the source selection
method. Press the [SRC] button, turn the [VOL]
knob to select the source, and then press the
[VOL] knob to determine it.
“Settings 1”/ “2”
“Tuner Preset
Type”/ “PRESET
TYPE”
Sets the Tuner preset type.
“Type Normal”/ “TYPE NORMAL”: 1 station
can be assigned to 1 preset button in each
of 4 bands (FM1, FM2, FM3, and AM), i.e.,
a total of 24 stations (6 stations x 4 bands)
can be preset.
“Type Mixed”/ “TYPE MIXED”: A total of 6
stations can be assigned to a total of 6 preset
buttons regardless of band (FM1, FM2, FM3,
and AM). You can recall a preset station
without switching between bands.
“Beep”/ “KEY
BEEP”
Setting the operation check sound (beep sound)
ON/OFF.
“ON”/ “OFF”
“Russian”/
“RUSSIAN SET”
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist
name/ Album name/ KCA-BT200 (optional
accessory)
“ON”/ “OFF”
“Menu
Language”*
You can select the display language for the
Function setting item.
“English”/ “Français”/ ”Español”/ “Deutsch”/
“Italiano”/ “Pyccкий”