Kenwood DPX504U - Manual (Page 20)

20
| DPX504U/ DPX404U/ DPX304
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button.
Select the “TUNER” display.
Selecting the Receiving Band
Press the [BAND] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [ 4] or [¢] button.
✍ Details of the station selecting in operation are
set in the
“Seek Mode”/ “SEEK MODE” of
Setting> (page 20) .
Traffic information
Press the [ ] button for at least 1 second.
Turns ON or OFF the Traffic Information function.
When the function is set to ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
“Traffic INFO”/ “TRAFFIC INFO” is displayed and
traffic information is received.
✍ If the volume is adjusted during reception
of traffic information, the adjusted volume
is memorized automatically. The memorized
volume will be applied next time the Traffic
Information function is turned ON.
Tuner Setting
You can select the following Tuner Setting items.
1
Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the desired
item is displayed.
Select “Settings”/ “SETTINGS”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the desired
item is displayed.
Display Overview
“Settings”/
“SETTINGS”
“Local Seek”/
“LOCAL SEEK”
Only stations whose reception is good are
searched in auto seek tuning.
“ON”/ “OFF”
“Seek Mode”/
“SEEK MODE”
Selects the tuning mode of the radio.
“Auto1”/ “AUTO1”: Automatic search for a
station.
“Auto2”/ “AUTO2”: Search in order of the
stations in the Preset memory.
“Manual”/ “MANUAL”: Normal manual
tuning control.
“Auto Memory”/
“AUTO MEMORY”
Memorizes 6 stations with good reception
automatically.
Refer to (page 22) .
“Forced MONO”/
“FORCED MONO”
Reduces the noise when stereo broadcasts are
received as monaural.
“ON”/ “OFF”
“News”/ “NEWS” Turns ON/OFF the News Bulletin Automatic
Reception function and sets the news bulletin
interrupt disabled time.
“OFF”/ “00MIN”/ “00M” – “90MIN”/ “90M”
“AF” When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. (AF: Alternative Frequency)
“ON”/ “OFF”
“Regional”/
“REGIONAL”
Sets whether to switch to the station only in
the specific region using the “AF” control.
“ON”/ “OFF”
“Auto TP Seek”/
“AUTO TP SEEK”
When traffic information station reception is
poor, automatically searches for a station that
can be received better.
“ON”/ “OFF”
( : Factory setting)
5
Make a setting
Turn the [VOL] knob.
SRC
VOL BAND 4 ¢
1 – 6