Kenwood NX-800E - Manual (Page 21)

3
S
cAn
d
eleTe
/A
dd
You can add and remove zones and/or channels/group IDs to and from your scan
list.
1
Select your desired zone and/or channel/group ID.
2 Press the key programmed as Zone Delete/Add (to add/remove zones) or
Scan Delete/Add (to add/remove channels/group IDs).
• You can also press and hold the key programmed as Scan Delete/Add to add/
remove zones.
p
rioriTy
-c
hAnnel
S
elecT
If the Priority channel has been set as Operator Selectable by your dealer, you
can reprogram the Priority channels.
1
Select your desired zone and channel/group ID.
2 Press the key programmed as Priority-channel Select.
3 Press / to select “NORMAL”, “PRIORITY ” ( ), “PRIORITY 2” ( ), or
“PRIORITY &2” ( ).
4 Press to save the setting and exit.