Kenwood NX-800E - Manual (Page 14)

6
PROGRAMMABLE FUNCTIONS
Following is a list of available programmable functions. Contact your dealer for
details on those functions which have been programmed on your transceiver.
• 2-tone
• Auto Reply Message 2
• Auto Telephone 3
• Autodial 4
• Autodial Programming 4
• AUX A
• AUX B
• Broadcast 5
• Call ~ 6
• CH/GID Down
• Channel Entry
• CH/GID Up
• CH/GID Recall
• Clock
• Clock Adjustment
• CW Message 6
• Direct CH/GID ~ 5
• Direct CH/GID Select ~ 5
• Display Format
• Emergency 7
• Fixed Volume
• Forced Search 5
• Function
• GPS Position Display
• Group (NXDN) 6
• Group + SDM (NXDN) 8
• Group + Status (NXDN) 8
• Home CH/GID
• Home CH/GID Select
• Horn Alert
• Individual (NXDN) 8
• Individual + SDM (NXDN) 8
• Individual + Status (NXDN) 8
• LCD Brightness
• Lone Worker
• Maintenance
• Menu
• Monitor 9
• Monitor Momentary 9
• OST (Operator Selectable Tone)
• Playback 2
• Priority-channel Select 0
• Public Address
• Scan
• Scan Delete/Add
• Scrambler/Encryption
• Scrambler/Encryption Code 8
• SDM (FleetSync/ NXDN)
• Selcall (FleetSync) 4
• Selcall + SDM (FleetSync) 4
• Selcall + Status (FleetSync) 4
• Send the GPS data
• Site Down 5
• Site Lock 5
• Site Up 5
• Squelch Level
• Squelch Off
• Squelch Off Momentary
• Stack
• Status (FleetSync/ NXDN)
• Talk Around 9
• Telephone Disconnect 3
• Transceiver Password
• Voice Memo 2
• Volume Down
• Volume Up
• Zone Delete/Add
• Zone Down
• Zone Up
Available only for Analog Conventional operation
2 Available only if the VGS- optional board has been installed.
3 Available only for Analog Trunking operation.
4 Available only for Analog Conventional and Analog Trunking operation.
5 Available only for NXDN Trunking operation.
6 Available only for NXDN Conventional operation.
7 Emergency can be programmed only on the key and an optional auxiliary switch, such as an
emergency foot switch.
8 Available only for NXDN Conventional and NXDN Trunking operation.
9 Available only for Analog Conventional, Analog Trunking, and NXDN Conventional operation.
0 Available only for Analog Conventional and NXDN Conventional operation.