Kenwood KOS-A210 - Manual (Page 18)

18 | KOS-A210
Operation of hands-free phoning
Make a voice dialing call
1 Enter voice recognize mode
Select “BT” > “Voice Recognize” (“V-RECOG”).
For how to select Function Control item, refer to
(page 6).
“Ready” is displayed.
2 Press the Control knob.
“PB Name?” (“PB NAME?”) is displayed.
When a beep is heard speak the name within 2
second.
3 “PN Type?” (“PN TYPE?”) is displayed.
When a beep is heard speak the category within 2
second.
4 Make a call
Press the Control knob for at least 1 second.
• This step is the same as step 3 of the procedure in
(page 17). You
can make a call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Refer to (page 37).
Pressing the Control knob allows you to retry voice input.
Registering to the Preset Dial Number
List
1 Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2 Enter Preset Memory mode
Press the [FNC] button.
3 Select the number to put in the memory
Turn the Control knob or push it towards up or
down.
4 Determine the number to put in the memory
Press the Control knob for at least 1 second.
Exit the Preset Memory mode
Press the [FNC] button.
Display of phone number type
(category)
The category items in the Phone Book are displayed
as follows:
Display Information
“GENERAL” / “ ”* General
“HOME” / “ ”* Home
“OFFICE” / “ ”* Office
“MOBILE” / “ ”* Mobile
“OTHER” / “ ”* Other
*Function of KOS-D210 (Optional Accessory).
Calling a number in the call log
1 Enter dialing method mode
Press the [ ] button.
2 Select the call log mode
Press the Control knob.
Select the “OUT-CALL” (outgoing call), “IN-CALL”
(incoming call), or “MISSED CALLS” (“MIS-CALL”)
(missed call) display.
3 Select a name or phone number
Turn the Control knob or push it towards up or
down.
Switching between Display Modes
Press the [FNC] button.
Pressing this button each time switches between
name and telephone number.
4 Make a call
Press the Control knob for at least 1 second.
⁄
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
• Both the name and category requires registration of
a voice tag. Refer to Category> (page 23)
• Audio sound is not output during voice recognize.
Function of KCA-BT200 (Optional Accessory)
B64-4455-00_00_KOS-A210_E.indd 18 B64-4455-00_00_KOS-A210_E.indd 18 09.2.18 2:27:59 PM 09.2.18 2:27:59 PM