Operation of hands-free phoning – Kenwood KOS-A210 User Manual
Page 16
16
|
KOS-A210
Operation of hands-free phoning
Before Use
• For details on the Bluetooth cell-phone with the
hands-free function, see
(page 26).
• You need to register your cell-phone before using
it with this unit. For more details, see
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see
• “BT” indicator is lit when a cell-phone is connected
to this unit.
Function of KCA-BT200 (Optional Accessory)
Receiving a call
Answering a Phone Call
Press the [
] button.
When a vehicle audio source is playing, switch
the source to this unit (AUX). When using the
transmitter function, tune your tuner frequency to
the transmitter frequency set with this unit.
⁄
• A phone call cannot be noticed with this unit powered
off.
Setting “MENU”
>
“Power Off Mode” (“PWR OFF”) of
automatically turned on when there is an incoming call.
• If a USB device is connected during a call the call will be
disconnected.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button or press the [
] button.
During a call
Disconnecting a Call
Press the [SRC] button or press the [
] button.
Switching to the Private Mode
Press the Control knob for at least 1 second.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the Control knob.
2
Turn the Control knob or push it towards up
or down. Select the “ANSWER” display.
3
Press the Control knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the Control knob.
Each pressing of this knob switches the calling
party.
Other functions
Clearing the Disconnection Message
Press the [SRC] button.
“HF Disconnect” (“HF D-CON”) disappears.
B64-4455-00_00_KOS-A210_E.indd 16
B64-4455-00_00_KOS-A210_E.indd 16
09.2.18 2:27:59 PM
09.2.18 2:27:59 PM