Kenwood KTC-D600E - Manual (Page 5)

English 5
You can select following system setting items. Set the system by controlling the touch panel of the monitor.
You can also operate the enclosed remote controller in the same way.
Settings
System Setting
1 Show Menu Control Screen by touching
[Menu] button.
2 Touch [

] or [

] button to select main item.
Setting > Search
Automatic Search
Search System Channel Preference
Manual Search
Switching frequency
Search Area
Active Antenna DC
Main item
3 Touch [

] or [

] button to select sub item
and then press [Enter] button.
Setting > Search
Automatic Search
Search System Channel Preference
Manual Search
Switching frequency
Search Area
Active Antenna DC
Sub item
4 Touch [

] or [

] button to select the value
to set and then press [Enter] button.
Setting > Switching frequency
Enable
Disable
5 Touch [Return] button when you are finished.
Setting item Selectable setting/item
“Search”
“Automatic Search” Search for currently available stations and save
them in the Channel List. (page 6)
“Manual Search” Search a station by specifying area or channel. (page 6)
“Switching frequency” The function is for watching same broadcasting
service between several areas.
“Enable”/“Disable”
“Search Area” The function is used to change a frequency table
of each country.
“Europe”/“Australia”/“Taiwan”
“Active Antenna DC” Active antenna is used, set to “Enable” (supplied
to DC 5V).
“Enable”/“Disable”
“System”
“System Status” You can view the system information (Hardware,
software and system version).
“Reset Default” All setting values will be returned to the initial
values. (page 8)
“Software Update” Display the firmware version and update the
firmware. For how to update the firmware, access
our web site. (page 8)
http://www.kenwood.com/cs/ce/
“Common Interface” You can view the CA card information. Information
will be displayed according to the CA card used.
“Channel”
“Edit Channel” You can additional and edit the favorite channels.
(page 7)
“Preference”
“Parental Control” You can set to censorship level and change to
password. (page 9)
“Language Setting” You can set to language for menu, Audio and
subtitle. (page 10)
Menu Language/Audio Language/Subtitle
Language: “English”/“German”/“Spanish”/
“Italian”/“Dutch”/“Portugal”/“Finland”/
“French”/“Russian”
“Time Setting” You need set to GMT (Greenwich mean time) Offset
and Daylight Saving. (page 11)
GMT Offset: “–12:00” — “0” — “+12:00”
Daylight Saving: “Enable”/“Disable”
“A/V Control” You can set to Audio output and Screen Ratio.
Audio Outut: “Stereo”/“Left”/“Right”
Screen Ratio: “4:3”/“16:9”
This function provides 4:3 and 16:9 two ratio for
user to select. If your display supports 4:3 screen
format and selected channel provides 4:3 format
program, select 4:3.
(Factory setting: Underlined)
1-KTC-D600E_ENG_1018.indd 5 2010-10-18 �� 1:48:50